Recording – Sony HDR-SR1 User Manual

Page 97

Advertising
background image

97

Trou

bl

esh

oot
in

g

You cannot delete all images at one time.

• Release the lock on the write-protect tab of the “Memory Stick Duo” if there is one (p. 116).

You cannot format the “Memory Stick Duo.”

• Release the lock on the write-protect tab of the “Memory Stick Duo” if there is one (p. 116).

The data file name is not indicated correctly.

• Only the file name is displayed, unless the directory structure conforms to the universal

standard.

• The file is damaged.
• The file format is not supported by your camcorder (p. 116).

The data file name flashes.

• The file is damaged.
• The file format is not supported by your camcorder (p. 116).

Refer also to “Adjusting the image during recording” (p. 99).

Pressing START/STOP or PHOTO does not record images.

• The playback screen is displayed. Set the POWER switch to

(Movie) or

(Still)

(p. 37, 38).

• Your camcorder is recording the scene you have just shot on the hard disk. You cannot make

new recording during this period (p. 38).

• The hard disk of the camcorder is full. Delete unnecessary images (p. 55). Or perform

[

FORMAT] (p. 66).

• Total number of movie scenes or still images exceeds the recordable capacity of your camcorder

(p. 19). Delete unnecessary images (p. 55).

• While activating [DROP SENSOR] (p. 80), you may not record movies/still images.

You cannot record a still image.

• The playback screen is displayed. Set your camcorder to recording standby (p. 38).
• You can capture up to 3 still images only during movie recording.
• Release the lock on the write-protect tab of the “Memory Stick Duo” if there is one (p. 116).
• The “Memory Stick Duo” has run out of space. Use a new “Memory Stick Duo” or format the

“Memory Stick Duo” (p. 66). Or delete the unnecessary images (p. 56).

• You cannot record a still image together with:

– [SMTH SLW REC]
– [FADER]
– [D.EFFECT]
– [PICT.EFFECT]

Recording

Continued

,

Advertising