Sony HDR-SR1 - Manual (Page 80)

80
GENERAL SET (Continued)
B 5 min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
NEVER
The camcorder is not automatically turned
off.
z Tips
• When you connect your camcorder to a wall
socket, [A.SHUT OFF] is automatically set to
[NEVER].
The default setting is [ON], allowing you to
use the supplied Remote Commander
(p. 130).
b Notes
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
You can select the data type to be saved on
a disc using the One Touch Disc Burn
function. See “First Step Guide” on the
supplied CD-ROM for details on the One
Touch Disc Burn operation.
B ALL
Saves all movies with both HD (high
definition) image quality and SD (standard
definition) image quality, and still images.
and
Saves movies with HD (high definition)
image quality, and still images.
and
Saves movies with SD (standard
definition) image quality, and still images.
[DROP SENSOR] is set to [ON] as the
default setting. When the drop sensor has
detected that the camcorder has been
dropped (
appears), recording or playing
back recorded images may be disabled to
protect the internal hard disk.
b Notes
• Set the drop sensor to [ON] (default setting)
when you use the camcorder. Otherwise when
you drop the camcorder, you may damage the
internal hard disk.
• In a non-gravity situation, the drop sensor
activates. When you record images during
activity such as roller-coasting or skydiving,
you can set [DROP SENSOR] to [OFF] (
)
so as not to activate the drop sensor.
• [DROP SENSOR] is automatically set to [ON]
after you remove the power source for more
than 12 hours.
A.SHUT OFF (Auto shut
off)
REMOTE CTRL (Remote
control)
DISC BURN SET
DROP SENSOR