Supplied accessories, Inserting batteries into the remote control – Sony STR-DN1030 User Manual

Page 9

Advertising
background image

9

US

D:\NORM'S JOB\SONY HA\SO130039\STR-DN1030_PMRF
06\4420297142_US\US01COV_STR-DN1030-CELTOC.fm

masterpage: Right

STR-DN1030

4-420-297-14(2)

Supplied accessories

• Operating Instructions (this manual)
• Quick Setup Guide (1)
• GUI Menu List (1)
• FM wire antenna (aerial) (1)

• AM loop antenna (aerial) (1)

• Remote control (RM-AAP078) (1)

• R6 (size AA) batteries (2)

• Optimizer microphone (ECM-AC2) (1)

Insert two R6 (size-AA) batteries (supplied) in
the remote control. Observe the correct
polarity when installing batteries.

Notes

• Do not leave the remote control in an extremely hot

or humid place.

• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds of

batteries.

• Do not expose the remote control sensor to direct

sunlight or lighting apparatuses. Doing so may
cause a malfunction.

• If you do not intend to use the remote control for an

extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.

• When you replace or remove the batteries, the

programmed codes may be cleared. If this happens,
reprogram the remote control (page 107).

• When the receiver no longer responds to the

remote control, replace all the batteries with new
ones.

Inserting batteries into the
remote control

Advertising