Sony STR-DH700 - Manual (Page 22)

22 US
4b: Connecting the video components
This section describes how to connect your
video components to this receiver. Before you
begin, refer to “Component to be connected”
below for the pages which describe how to
connect each component.
Before connecting the cords, be sure to
disconnect the AC power cord (mains lead).
After connecting all your components,
proceed to “5: Connecting the antennas
(aerials)” (page 28).
Component to be connected
If you want to connect several
digital components, but cannot
find an unused input
See “Listening to digital sound from other
inputs (DIGITAL ASSIGN)” (page 89).
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
Note
Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
How to connect your
components
Component Page
TV 20
With HDMI jack 23
DVD player/Blu-ray disc player 25
Satellite tuner/Set-top box 26
DVD recorder, VCR 27
Camcorder, video game, etc. 27
Video input/output jacks to be
connected
HDMI
VIDEO
COMPONENT VIDEO
Y
P B / C B
P R / C R
Digital Analog
High quality image