Sony STR-DH700 - Manual (Page 82)

82 US
Notes
• Insert the wireless transmitter with the S-AIR logo
facing up.
• Insert the wireless transmitter so that the V marks
are aligned.
• Do not insert other than the wireless transmitter
into the EZW-T100 slot.
3 Use the screws that you removed from
step 1 to fasten the wireless
transmitter.
Note
Do not use other screws to fasten the wireless
transmitter.
To insert the wireless
transceiver into the S-AIR sub
unit
For details on installing the wireless
transceiver into surround amplifier and S-AIR
receiver, refer to the operating instructions
supplied with the surround amplifier and
S-AIR receiver.
When you match the ID of the S-AIR main
unit and the S-AIR sub unit, you can establish
sound transmission. You can use multiple
S-AIR main unit by setting a different ID for
each unit.
To set the ID of the S-AIR main
unit
1 Press AMP MENU.
“1-LEVEL” appears on the display.
2 Press V/v repeatedly to select
“9- S-AIR”.
3 Press or b to enter the menu.
4 Press V/v repeatedly to select “ID
SETUP”.
5 Press or b to enter the parameter.
6
Press V/v repeatedly to select the ID
(A, B or C) you want, then press .
To exit the menu
Press AMP MENU.
EZW
-T100
Establishing sound transmission
between the S-AIR main unit and
S-AIR sub unit (ID setting)
1 2 3
4 6
7 8
0/10 ENTER
9
TV CH –
PRESET –
TV CH +
PRESET +
AMP MENU
CLEAR
DISPLAY MUTING
TV VOL
MASTER VOL
DVD/BD
MENU
AUTO CAL
D.TUNING
D.SKIP
THEATER
. < < >
5
>10
REPLAY ADVANCE
– CATEGORY +
MEMORY
O
TOOLS/
OPTIONS
RETURN/EXIT MENU/HOME
AMP
MENU
,
V/v/B/b