Preparing the receiver and the remote, Connecting the ac power cord (mains lead), Performing initial setup operations – Sony STR-DH700 User Manual
Page 29: Press ? / 1 to turn off the receiver, Hold down ? / 1 for 5 seconds, Ge tting star te d
29
US
Ge
tting Star
te
d
6: Preparing the receiver
and the remote
Connect the AC power cord (mains lead) to a
wall outlet.
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1
Press ?/1 to turn off the
receiver.
2
Hold down ?/1 for 5 seconds.
“PUSH” and “ENTER” appears on the
display alternately.
3
Press MEMORY/ENTER.
After “CLEARING” appears on the
display for a while, “CLEARED”
appears.
All the settings you have changed or
adjusted are reset to the initial settings.
Connecting the AC power cord
(mains lead)
FRONT A
AC power cord (mains lead)
To the wall outlet
Performing initial setup
operations
?/1
PHONES
SPEAKERS
INPUT SELECTOR
INPUT MODE
TUNING MODE
MASTER VOLUME
TONE MODE
DISPLAY
DIMMER
MUTING
MEMORY/
ENTER
2CH/
A.DIRECT
A.F.D.
MOVIE
MUSIC
TUNING
TONE
VIDEO 2 IN
VIDEO
L AUDIO R
AUTO CAL MIC
?/1
MEMORY/ENTER