Sony MHC-ZX10 - Manual (Page 18)

18
1
Press A A or A B and insert a recorded
tape in deck A or B.
Tape presence indicator lights in the display.
2
Press FUNCTION repeatedly to select
“TAPE A” or “TAPE B”.
3
Press MODE SELECT repeatedly to
select “Set Up Mode”, then press PUSH
ENTER.
4
Move the multi stick toward b or B
repeatedly to select “TAPE Set Up ?”,
then press PUSH ENTER.
5
Move the multi stick toward b or B
repeatedly to select “Direction Set
Up ?”, then press PUSH ENTER.
6
Move the multi stick toward b or B
repeatedly to select “1 Way” to play one
side, “Cycle” to play both sides, or
“Relay”* to play both decks in
succession, then press PUSH ENTER.
Playing a tape (continued)
7
Press TAPE A (or TAPE B) N.
Press TAPE A (or TAPE B) n to play the
reverse side. The tape starts playing.
When using the remote, press TAPE A (or
TAPE B) N to start playback. To play
reverse side, press TAPE A (or TAPE B) N
again.
* Relay play always follows the following sequence:
t Deck A (front side) t Deck A (reverse side)
Deck B (reverse side) T Deck B (front side) T
To
Stop play
Fast-forward
Rewind
Remove the cassette
Adjust the volume
* This tape deck does not have play pause function.
You cannot use X to pause tape playback.
To cancel the menu operation
Press MODE SELECT.
Insert with the side
you want to play
facing forward.
Do this
Press x.
Press m or M.
Press m or M.
Press A A or A B.
Turn VOLUME (or press
VOL +/– on the remote).
Tape presence indicator