Sony MHC-ZX10 - Manual (Page 24)

24
x
Programming the CD
tracks
–– Program Play
You can make a program of up to 32 tracks from
all the CDs in the order you want them to be
played.
?/1
(Power)
1 2
Multi stick
PUSH ENTER
10
1
Press FUNCTION repeatedly until
“CD” appears in the display, then place
a CD.
2
Press MODE SELECT repeatedly to
select “Set Up Mode”, then press PUSH
ENTER.
3
Move the multi stick toward b or B
repeatedly to select “CD Set Up ?”, then
press PUSH ENTER.
4
Move the multi stick toward b or B
repeatedly to select “Program Set ?”,
then press PUSH ENTER.
5
Move the multi stick toward v or V
repeatedly to select a CD.
If you want to program all the tracks on a CD
at once, select a CD in this step, then skip
step 6 and continue with step 7.
6
Move the multi stick toward b or B
repeatedly to select the desired track.
PROGRAM
7
Press PUSH ENTER.
The track is programmed. When all the
tracks are selected, “AL” appears in the
display and all the tracks are programmed as
one step. The program step number appears,
followed by the total playing time.
Track number
Total playing time
(including selected track)
Disc number
V
v
B b
x
VOL +/–
MODE SELECT
B/b
ENTER
CD N
v/V