Sony MHC-ZX10 - Manual (Page 34)

34
40Hz
100Hz
100Hz
6kHz
Changing the spectrum
analyzer display
You can enjoy changing the display while
listening to the music.
1
Press MODE SELECT repeatedly to
select “Set Up Mode”, then press PUSH
ENTER.
2
Move the multi stick toward b or B
repeatedly to select “Display Set Up ?”,
then press PUSH ENTER.
3
Move the multi stick toward b or B
repeatedly to select “Spectrum Set
Up ?”, then press PUSH ENTER.
Multi stick
PUSH ENTER
1 ?/1
(Power)
Low frequency (around 100 Hz)
meter
High frequency (around 6 kHz)
meter
4
Move the multi stick toward b or B
repeatedly to select the effect you
desire, press PUSH ENTER.
Each time you move the multi stick toward
b or B, the display changes as follows:
Spectrum 1
Y
Spectrum 2
Y
Spectrum 3
Y
Spectrum Off
To cancel the menu operation
Press MODE SELECT.
To adjust the brightness of the
display
In step 3 above, select “Dimmer Set Up ?”. Move
the multi stick toward b or B repeatedly to select
the effect you desire, press PUSH ENTER.
Each time you move the multi stick toward b or
B , the display changes as follows:
Dimmer Off
Y
Dimmer 1
Y
Dimmer 2
Y
Dimmer 3
Y
Dimmer 4
Y
Dimmer 5
To check the frequency level
The meters in the display rise and fall according to
the strength of beat (high frequency and low
frequency).