Play an md – Sony MZ-R90 User Manual

Page 12

Advertising
background image

12

3

Play an MD.

1

Press N (Press the control towards
N > on the remote control).
A short beep sounds in the headphones
when you operate on the remote control.

2

Press VOL +/– to adjust the volume.
The volume will be shown in the
display.

To stop play, press x.

A long beep sounds in the headphones when
you operate on the remote control.
Playback starts from the point you last stopped
playing.
After you press x, the recorder will
automatically turn off in about 10 seconds
(when using batteries) or about 5 minutes
(when using AC power adaptor).

If the play does not start

Make sure the recorder is not locked (page 29).

When using optional headphones

Use only headphones with stereo mini plugs.

You cannot use headphones with micro plugs.

VOL +/–

VOL +/–

x

x

N

To

Press (Beeps in the headphones)

Find the beginning of the
current track

. once (Press the control towards . on the remote
control). (Three short beeps)

Find the beginning of the
next track

> once (Press the control towards N > on the
remote control). (Two short beeps)

Pause

X (Continuous short beeps)
Press X again to resume play.

Go backwards while
playing

1)

keep pressing . (Press and hold the control towards
. on the remote control)

Go forward while playing

1)

keep pressing > (Press and hold the control towards
N > on the remote control)

Remove the MD

x and open the lid.

2)

1)

To go backward or forward quickly without listening, press X and keep pressing . or > (press
and hold the control towards . or N > on the remote control).

2)

Once you open the lid, the point to start play will change to the beginning of the first track.

Stereo mini plug

Micro plug

Advertising