Sony MZ-R90 - Manual (Page 18)

18
• Sound recorded through digital (optical) input
can be monitored in stereo through
headphones, etc. Adjusting the recording
level manually
(Manual recording)
When you record, the sound level is
adjusted automatically. If necessary, you
can set the level manually.
Note
Adjust the recording level while the recorder is
in standby mode. You cannot adjust it while
recording.
1
While holding down X, slide REC to
the right.
The recorder stands by for recording.
2
Press the jog lever, flip until
“RecVolume” flashes in the display,
and then press the lever again.
3
Flip the jog lever until “ManualREC”
flashes in the display, and then press
the lever.
To switch back to the automatic
control, flip the jog lever until “Auto
REC” flashes in the display, and then
press the lever.
4
Play the source.
. />
REC
X
Jog lever
ManualREC