Sony MZ-R90 - Manual (Page 24)

24
7
Press the jog lever.
“TOC Edit” flashes.
Afterwards, the disc name scrolls in
the display.
z
If the disc or track name appears in the display
in step 1, the music tracks and CD text
information on some CDs are automatically
recorded from start to finish. If the CD is this
type, press x on the recorder at the point you
want to stop recording, or after all tracks have
been recorded. “TOC Edit” flashes. Afterwards,
the disc name scrolls in the display.
Notes
• If you copy disc name information to a disc
with a previously recorded disc name, the old
disc name will be overwritten with the new
one.
• When the CD text copying function is on,
various settings and editing functions cannot
be accessed with the jog lever.
z
You can monitor the sound during recording.
Connect the supplied headphones with remote
control on to the CD text connecting cable and
adjust the volume by pressing the VOL +/–
buttons on the recorder.
Notes
• The CD text copying function can only be
used with component (D-EJ01) with the logo
shown below.
• The CD text copying function can only be
used with CDs that support CD-TEXT.
• The RK-TXT1 CD text connecting cable is
designed for exclusive use with this recorder
and Sony portable CD player (D-EJ01). Do
not use a connecting cable of another make to
copy CD text information.
• The remote becomes inoperative when the CD
text connecting cable (RK-TXT1) is
connected to the recorder.
• Stopping or pausing playback on the CD
player automatically causes recording on the
recorder to pause. A new track mark is
automatically added when you resume
recording.
• The track name of the track currently played
will not be recorded if you stop or pause CD
playback in the middle of the copying process
on the recorder.
Connect the supplied headphones
with remote control