Sony MZ-R90 - Manual (Page 38)

38
3
Flip the jog lever or press ./>
repeatedly.
Flipping the jog lever or pressing the
buttons causes the phrases stored in
the phrase bank to appear one by one
in sequential order. If you press X at
this time, the first phrase stored in the
phrase bank retrieved.
4
Press the jog lever while the phrase
you want is shown in the display.
The cursor flashes after the phrase
you just retrieved. You can then
continue with labeling operation.
Searching for a phrase by its first
letter
1
When labeling a track or disc, use
VOL +/– to move the cursor to the
letter which the desired phrase begins
with.
2
Press X to search.
The phrase for that letter appears in
the display. If there are two or more
phrases that start with that letter, press
X to see the next phrase.
3
Press the jog lever while the phrase
you want is shown in the display.
The cursor flashes after the phrase
you just retrieved. You can then
continue with labeling operation.
Erasing phrases
You can erase phrases from the phrase
bank while the recorder is stopped. You
can also erase phrases when the recorder
is empty.
1
Press the jog lever so that “EDIT”
appears, and then press the lever
again.
2
Flip the jog lever until “BankErase”
appears, and then press the lever.
3
Flip the jog lever until the phrase you
want to erase appears, and then press
the lever.
“Erase!” appears and the phrase is
erased. If no phrase is stored in the
phrase bank, “EMPTY” appears in
the display.
To cancel the operation, press x or T
MARK
On the remote control
Storing phrases while labeling
1
Do the procedure “On the remote
control” in “Labeling recordings”
(page 35) to enter a phrase.
2
After entering the phrase, press X for
2 seconds or more.
“Entry!” appears in the display and
the cursor flashes after the phrase you
just stored. You can then continue
with labeling operation.
z
You can store phrases from a previously labeled
track or disc.
Do the procedure “Relabeling recordings”
(page 36) and display the track or disc name
that contains the phrase that you want to store.
Press VOL +/– repeatedly to move the cursor to
the right of the phrase. Then press X for 2
seconds or more to store the phrase.
DISPLAY
X
control
x