On the recorder – Sony MZ-R90 User Manual
Page 28
28
Checking the remaining
time or the playing
position
You can check the track name, disc name,
etc. during playback.
On the recorder
1
While the recorder is playing, press
the jog lever, flip until “DISPLAY”
flashes in the display, and then press
the lever again.
2
Flip the jog lever until the
information you want flashes in the
display.
Each time you flip the lever, the
display changes as follows.
Display window on the recorder
3
Press the jog lever.
The display changes as follows.
Display window on the recorder
z
• If you want to check the remaining time or the
recording position while recording or in stop
mode, see page 19.
• The display that appears on the remote control
is different from the ones on the recorder. See
“On the remote control” (page 29) to check
the display that appears on the remote control.
A
B
1)
1)
Display order
C
2)
2)
Number of displayed items
LapTime
1
4
1 Remain
2
4
AllRemain
3
4
RecDate
4
4
Jog lever
A
B
C
A
B
Track number
Elapsed time
Track name
1)
1)
Appears only if the track has been labeled.
Remaining time of
the current track
Disc name
Remaining time
after the current
location
Recorded date
2)
2)
Appears only when the clock is set.
Recorded time
A
B