Receiver (amplifier) hookups, Receiver (amplifier) hookups 12, Getting started – Sony DVP S9000ES User Manual
Page 12
12
Getting Started
AUDIO OUT
2
R
L
2
1
2
Y
P
B
P
R
SCAN SELECT
SELECTABLE
INTERLACE
PROGRESSIVE
1
PCM/DTS/
DOLBY DIGITAL
CONTROL S IN
OPTICAL COAXIAL
DIGITAL OUT
COMPONENT VIDEO OUT
S VIDEO
OUT
VIDEO
OUT
S-LINK
1
CD
L
R
DIGITAL IN
OPTICAL
COAXIAL
S VIDEO
VIDEO
AUDIO
INPUT
L
R
Receiver (Amplifier) Hookups
SACD/DVD player
To AUDIO OUT
TV
To audio input
: Signal flow
Receiver
(Amplifier)
To an AC outlet
To S VIDEO OUT
To S VIDEO
input
To DIGITAL
OUT
(OPTICAL)
Take off the
cap.
To
DIGITAL
OUT
(COAXIAL)
or
To optical digital input
To coaxial digital input
Receiver
(Amplifier) with
a digital
connector, MD
deck, DAT deck,
etc.
or
Do not connect the AC outlet to a switched AC power
supply such as the AC outlet on a receiver (amplifier).
Doing so may cause the Playback Memory, Disc Memo and
menu settings to be cancelled when you turn off the
receiver.
* Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks
of Dolby Laboratories.
Confidential unpublished works. ©1992-1997 Dolby
Laboratories. All rights reserved.
This connection is for listening to the sound through
speakers connected to a receiver lacking a built-in DTS or
Dolby* Digital decoder. Refer as well to the instructions
supplied with the component to be connected.
z
If you have a digital component with a built-in DTS or Dolby
Digital decoder
You can enjoy multi-channel surround sound by connecting the
component via the DIGITAL OUT OPTICAL or COAXIAL
connector using an optical or coaxial digital connecting cord (not
supplied). For details on hookups and settings, see page 14.