Alliance Laundry Systems 512685R2 - Manual (Page 32)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Vending
512685 30
Test Setting
When testing coin slide operation or other
troubleshooting, set dipswitch with this shorter cycle:
1. Unplug the machine power cord.
2. Record the machine control dipswitch settings.
Then set them all to the off position. Refer to
Figure 34.
3. Plug in the machine and initiate a cycle.
NOTE: With all the control dipswitches off, the
total cycle time will be four minutes long.
4. Once all the testing is complete, unplug the
machine and re-set the dipswitches to their
original settings.
5. Plug in the machine.
Figure 34
DRY2225P
DRY2225P
1 2 3 4 5 6 7 8
O
N