Acroprint ES1000 - Manual (Page 27)

ES1000 User’s Manual 21
R
ESTART
B
UTTON
If the ES1000 malfunctions, press the Restart Button. This will restart the ES1000, but you will
not lose your settings and the timecard data.
Restart Button
Auto Break Length
When an employee has been punched in for at least the Auto Break Elapsed Time or longer,
the Auto Break Length will be subtracted from the worked time total.
When an Auto Break is taken, an “*” will print next to the resulting day total.
Example
Auto Break After = 6 Hours
Auto Break Length = 60 Minutes
Reset To Factory Defaults
Restores the ES1000 settings to the factory defaults.
You will lose all programming and timecard data.
If the clock malfunctions and you would like to restart the ES1000 without losing the
program settings and timecard data, press the Restart Button as shown on the next
page.
,1
 $
287
 3
'$,/<727$/
 
3FTUBSU
CVUUPO