Aastra Telecom MERIDIAN 9417CW - Manual (Page 18)

14
Setting the ring tone and ringer volume
You can choose one of four different ring tones and set the ringer volume for each line.
Note: The steps above set the ring tone and volume for one line only. You must repeat
these steps to set the ring tone and volume for the other line.
Controlling the ringer volume
While the telephone is ringing on one line, you can press the left or right side of the vol-
ume bar
√ to adjust the ringer volume for that line.
Controlling the handset volume
While you are on the telephone, you can press the left or right side of the volume bar
√ to adjust the handset volume. The handset volume returns to normal after you
have completed your call.
Controlling the speaker volume
While you are listening through the speaker, you can press the left or right side of the vol-
ume bar
√ to adjust the speaker volume. The speaker volume remains at the vol-
ume you last selected until the next time you change it.
Changing the prime line
The prime line is the line that is automatically selected when you lift the handset or press
© or ∂. The default setting for prime line is Line 1. You can select either line
as your prime line.
To set the ring tone and volume:
1. Make sure that the ringer is turned on.
2. Press the Set Options key.
3. Press
•
to enter the Options List.
4. Use
ª
to scroll to number 1 or press
⁄
.
5. Press
⁄
and follow the instructions on the display.
When picking the ring tone, press
√
to adjust the volume.
6. Press
ß
to end only when you are satisfied with ring tone and ringer volume.
7. Press
®
.
To change the prime line:
1. Press the Set Options key.
2. Press
£
to enter the Setup List.
3. Use
ª
to scroll to number 5 or press
fi
.
4. Press
fi
to select the prime line.
5. Press
®
.
P0844339 04 E UG 9417CW Page 14 Thursday, April 20, 2000 11:09 AM