Aastra Telecom MERIDIAN 9417CW - Manual (Page 27)

23
Saving from the display into memory keys
Saving an active call into a memory key
Labeling the memory keys
After programming the memory keys, label them with the supplied blank labels and
key caps.
†
To save from the display:
1. Ensure that a number is on the display. (For example, access the Redial List or Call-
ers List.)
2. Press
ß
.
3. Press the desired memory key. If the name was displayed with the number, both are
now saved in the memory key and you’re finished.
4. If no name is displayed, you are prompted to enter one. If you don’t want a name, go
to step 5. To enter a name, use the dial pad. (See Entering Names on page 16.)
5. Press
ß
.
6. Label the memory key. (See the diagram on page 23.)
To save an active call:
1. Answer or make a call.
2. Press
ß
.
3. Press the desired memory key. If the name was displayed with the number, both are
now saved in the memory key.
Note: Do not press
®
or else you will hang up on your caller.
† Keep keys caps and the sliding panel away from small children. These small parts may come off the telephone
if it is dropped.
P0844339 04 E UG 9417CW Page 23 Thursday, April 20, 2000 11:09 AM