Aastra Telecom MERIDIAN 9417CW - Manual (Page 29)

25
Saving features in memory keys
†
For easy access, you can save the feature codes of telephone company services in your
memory keys. This works well with network features such as Call Forwarding and Call
Return. Some features require an On and Off code in two separate keys, while other fea-
tures are stored on only one key. The following procedures show you how to save both an
On and Off code.
Using feature keys
When a memory key is programmed with a feature code, you can use the memory key to
activate or deactivate the feature.
The active feature applies only to the line you selected or to the prime line if you did not
press a line key. For example, if you want to forward all incoming calls, you must turn the
feature on for each line.
Note: If the Live dial pad option is turned on, you do not have to lift the handset or press
any other button. Pressing the memory key will automatically dial the feature code
and put the telephone in Handsfree mode.
Saving a feature and light in memory keys
You can make the set indicator light come on when you turn a feature on and go off when
you turn that same feature off. You can only do this with one feature, and the feature must
have separate On and Off codes (such as Call Forwarding).
† You must subscribe to your telephone company for Custom Calling Features.
To save a Feature On code: To save a Feature Off code:
1. Press
ß
. 1. Press
ß
.
2. Press the memory key where you want
to save the number. 2. Press the memory key where you want
to save the number.
3. Enter the telephone company feature
code for turning the feature on.
†
† Note: Contact your telephone company for the appropriate feature codes.
3. Enter the telephone company feature
code for turning the feature off.
†
Read the display to confirm the number. Read the display to confirm the number.
4. Press
ß
. 4. Press
ß
.
5. Enter the feature name using the dial
pad. (See Entering Names on
page 16.) 5. Enter the feature name using the dial
pad. (See Entering Names on
page 16.)
6. Press
ß
. 6. Press
ß
.
7. Label the memory key. 7. Label the memory key .
To turn a feature on or off:
1. Press the memory key where you stored the desired feature. The display shows the
feature name and code.
2. Lift the handset or press either
©
,
∂
, or
¬
.
The feature code is dialed out, which turns the feature on or off.
P0844339 04 E UG 9417CW Page 25 Thursday, April 20, 2000 11:09 AM