Aastra Telecom MERIDIAN 9417CW - Manual (Page 45)

41
The Callers List is empty.
Until you subscribe to Calling Line Identification
†
service, your telephone does not record
incoming calls. Also, the Call Log option may be set to log no calls. See page 19 for
information.
I cannot dial a number in the Callers List.
The caller may have an unknown number.
The telephone hisses while not in use.
The page feature has been activated, but the page lines have not been connected to the
telephone. Delete the page key.
How do I connect my fax to work with this phone?
To set up a fax machine to work with the M9417CW, you must first subscribe to a Distinct
Ring
†
service for line 2 through your telephone company. Connect the fax to the
M9417CW jack marked 2 . Next, set the fax machine to pick up after at least three rings
(consult the fax machine manual for details). Finally, enable the fax switch option (option
6) on the M9417CW. For more details, refer to Connecting an optional fax machine or
modem on page 5 and The Fax Switch on page 33.
When the Fax switch feature is enabled, the message “Extension in use” appears for
Line 2 and Line 2 is not being used.
Make sure that the fax machine, or other Fax Switch peripheral, is connected to jack 2 of
the 9417CW telephone. For the Fax Switch feature to operate properly, the telephone line
(containing both line 1 and line 2) must be connected to jack 1 of the 9417CW and the Fax
Switch peripheral must be connected to jack 2 of the 9417CW. The Fax Switch peripheral
should not be connected to the telephone line directly (i.e. connected to the socket on the
wall).
The speakerphone is not working.
If the speakerphone is not working, the option for the headset may be enabled. To fix this
problem, go to option 1 in the set up list and turn the option off.
I have only one line connected to my phone, and I keep getting the message Check
line cord
.
You may disable this prompt via option 9 under the Setup List. Also check that the line
cord is connected to a jack.
How do I set up paging on this phone?
You can connect up to four phones or external speakers to a paging loop with the
M9417CW. Each phone in the paging loop must be connected via pins 1 and 6 of Jack 2,
which requires a 6 conductor line cord. Contact your local telephone company to have to
have the page lines connected. For a detailed diagram, refer to Installing the page lines
on page 29.
† This service may have a different name in your area. Contact your telephone company for information.
P0844339 04 E UG 9417CW Page 41 Thursday, April 20, 2000 11:09 AM