Asus RS100-E5-PI2 - Manual (Page 107)

ASUS RS100-E5-PI2 6-13
4. Select all the drives required for the RAID set, then press <Enter> to end
array. The configurable array appears on screen.
3. The ARRAY SELECTION MENU displays the available drives connected to
the SATA ports. Select the drives you want to include in the RAID set, then
press <SpaceBar>. When selected, the drive indicator changes from READY
to ONLIN A[X]-[Y], where X is the array number, and Y is the drive number.
The information of the selected hard disk drive displays at the bottom of the
screen.
LSI Software RAID Configuration Utility Ver A.53 Sep 06, 2007
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Virtual Drives,F4-HSP
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 0 DISK 156402MB HDS728080PLA380 PF20A60A
Easy Configuration - ARRAY SELECTION MENU
PORT #
READY
READY
0
3
LSI Software RAID Configuration Utility Ver A.53 Sep 06, 2007
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Virtual Drives,F4-HSP
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 0 DISK 156402MB HDS728080PLA380 PF20A60A
Easy Configuration - ARRAY SELECTION MENU
PORT #
0
3
ONLIN A00-01
ONLIN A00-00