Asus RS100-E5-PI2 - Manual (Page 118)

6-24 Chapter 6: RAID Configuration
3. After selecting the drive to rebuild, press <F10>. The indicator for the
selected drive now shows RBLD.
4. When prompted, press <Y> to to rebuild the drive.
5. When rebuild is complete, press any key to continue.
LSI Software RAID Configuration Utility Ver A.53 Sep 06, 2007
SPACE-(De)Select,F10-Start Rebuild,F2-Drive Information,F3-View Virtual Drives
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 1 DISK 156402MB HDS728080PLA380 PF20A60A
REBUILD - PHYSICAL DRIVES SELECTION MENU
PORT #
LSI Software RAID Configuration Utility Ver A.53 Sep 06, 2007
SPACE-(De)Select,F10-Start Rebuild,F2-Drive Information,F3-View Virtual Drives
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 1 DISK 156402MB HDS728080PLA380 PF20A60A
REBUILD - PHYSICAL DRIVES SELECTION MENU
ONLIN A00-01
ONLIN A00-00
PORT #
0
1
Rebuilding Of Drive Will Take A Few Minutes. Start Rebuilding Drive (Y/N)?
0
3
ONLIN A00-01
ONLIN A00-00