Asus RS100-E5-PI2 User Manual
Page 130
7-6
Chapter 7: Driver installation
Intel Matrix Storage
Select “Intel(R) 82801GR/GH SATA RAID Controller (Desktop ICH7RDH)”
for Intel Matrix Storage RAID mode from the list, then press <Enter>.
If you configured SATA as AHCI Mode in the BIOS setup utility of IDE
Configuration, first install the Intel SATA AHCI Driver during windows setup.
Then, select the “Intel(R) 82801GR/GH SATA AHCI Controller (Desktop
ICH7RDH)” from the list. Refer to section 7.1.1 Creating a RAID driver disk
to create the Intel SATA Driver for windows system.
6. The Windows
®
Setup loads the RAID controller drivers from the RAID driver
disk. When prompted, press <Enter> to continue installation.
7. Setup then proceeds with the OS installation. Follow screen instructions to
continue.
ENTER=Continue F3=Exit
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
Intel(R) 82801GR/GH SATA RAID Controller (Desktop ICH7R/DH)
Intel(R) 82801GR/GH SATA AHCI Controller (Desktop ICH7R/DH)
Intel(R) 82801FR SATA RAID Controller (Desktop ICH6R)
Intel(R) 82801FR SATA AHCI Controller (Desktop ICH6R)
Intel(R) 82801FBM SATA AHCI Controller (Mobile ICH6M)
Intel(R) 82801ER SATA RAID Controller (Desktop ICH5R)
Intel(R) 6300ESB SATA RAIID Controller