Asus RS100-E5-PI2 - Manual (Page 106)

6-12 Chapter 6: RAID Configuration
Menu Description
Configure Allows you to create RAID 0 or RAID 1 set using the Easy
Configuration or the New Configuration command. This menu also
allows you to view, add, or clear RAID configurations or select the
boot drive
Initialize Allows you to initialize the virtual drive of a created RAID set
Objects Allows you to initialize virtual drive or change the virtual drive
parameters
Rebuild Allows you to rebuild failed drives
Check Consistency Allows you to check the data consistency of the virtual drive of a
created RAID set
6.3.1 Creating a RAID 0 or RAID 1 set
The LSI Software RAID Configuration Utility allows you to create a RAID 0 or RAID
1 set using two types of configurations: Easy and New.
In Easy Configuration, the virtual drive parameters are set automatically including
the size and stripe size (RAID 1 only).
In New Configuration, you manually set the virtual drive parameters and assign
the set size and stripe size (RAID 1 only).
Using Easy Configuration
To create a RAID set using the Easy Configuration option:
1. From the utility main menu, highlight Configure, then press <Enter>.
2. Use the arrow keys to select Easy Configuration, then press <Enter>.
LSI Software RAID Configuration Utility Ver A.53 Sep 06, 2007
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Defines Physical Arrays. An Array Will Automatically Become A VD
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive