6 selecting the boot drive from a raid set, Selecting the boot drive from a raid set -29 – Asus RS100-E5-PI2 User Manual
Page 123
ASUS RS100-E5-PI2
6-29
6.3.6
Selecting the boot drive from a RAID set
You must have created a new RAID configuration before you can select the
boot drive from a RAID set. Refer to the Creating a RAID set: Using New
Configuration section for details.
To select the boot drive from a RAID set:
1. From the Management Menu, select Configure > Select Boot Drive, then
press <Enter>.
2. When prompted, use the arrow keys to select the bootable virtual drive from
the list, then press <Enter>.
3. The virtual drive is selected as boot drive. Press any key to continue.
LSI Software RAID Configuration Utility Ver A.53 Sep 06, 2007
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Select A Boot VD
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
LSI Software RAID Configuration Utility Ver A.53 Sep 06, 2007
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Select A Boot VD
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
Bootable VDs(1):Current Boot VD(0)
Boot Drive 0