Asus RS100-E5-PI2 - Manual (Page 124)

6-30 Chapter 6: RAID Configuration
6.3.7 Enabling the WriteCache
You may enable the RAID controller’s WriteCache option to improve the data
transmission performance.
When you enable WriteCache, you may lose data when a power interruption
occurs while transmitting or exchanging data among the drives.
To enable WriteCache:
1. From the Management Menu, select Objects > Adapter, then press
<Enter> to display the adapter properties.
2. Select Disk WC, then press <Enter> to turn the option On (enabled).
3. When finished, press any key to continue.
LSI Software RAID Configuration Utility Ver A.53 Sep 06, 2007
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Disk Write Cache - Off(Write Through) or On(Write Back)
Objects
Adapter
Virtual Drive
Physical Drive
Adapter 0
Rebuild Rate = 30
Chk Const Rate = 30
FGI Rate = 30
BGI Rate = 30
Disk WC = Off
Read Ahead = On
Bios State = Enable
Stop On Error = No
Fast Init = Enable
Auto Rebuild = On
Auto Resume = Enable
Disk Coercion = 1GB
Factory Default