Asus RS100-E5-PI2 - Manual (Page 98)

6-4 Chapter 6: RAID Configuration
6.2 Intel ® Matrix Storage Manager Option
ROM Utility
The Intel ® Matrix Storage Manager Option ROM utility allows you to create RAID
0 or RAID 1 from Serial ATA hard disk drives that are connected to the Serial ATA
connectors supported by the Southbridge.
To enter the Intel
® Matrix Storage Manager Option ROM utility:
1. Install all the Serial ATA hard disk drives.
2. Turn on the system.
3. During POST, press <Ctrl> + <I> to display the utility main menu.
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.
Intel(R) Matrix Storage Manager Option ROM v5.6.2.1002 ICH7R wRAID5
Copyright(C) 2003-06 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 Hitachi HDS72161 PVB300Z2R93D3D 153.4GB Non-RAID Disk
3 Hitachi HDS72161 PVB300Z2R93D3D 153.4GB Non-RAID Disk
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
[ DISK/VOLUME INFORMATION ]
[ MAIN MENU ]