Asante Technologies 1012 - Manual (Page 66)

Page 3-10
Chapter 3 — AsantéBridge 1012 Local Management
Access to all bridge configuration functions is password pro-
tected. The password is stored in bridge memory. The default pass-
word is
Asanté . Be sure to enter it exactly as shown here; the
password field is case sensitive.
This menu is not accessible from AsantéView.
Figure 3-6 Password Menu
❖ Important: For security reasons, the current password is
not displayed. If you lose your password, you must call
Asanté Technical Support to be issued a new one. ❖
1
Highlight the Password field and press return .
2
Enter the new password (maximum of 15 characters) in
the data entry bar at the prompt. Press
return when done.
3
You will be prompted to re-enter the new password to
confirm it. Remember that the password field is case sensi-
tive.
If you enter the new password incorrectly, you are asked to
enter a new password again.
If you enter it correctly, the window returns to its original
state; the new password has been defined and sent to the
bridge.
4
Press control-z to return to the Configuration Menu.
Password Menu