Vhs]]^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^), Before use, Video cassettes ≥video cassette care – Panasonic DMRE75V User Manual
Page 48: Maintenance, L 48
48
[[VHS]]
Before Use
The surface from which you can see a roll of tape should face up,
Insert a video cassette.
≥This unit is automatically turned on.
∫ To eject a video cassette
≥You can eject a video cassette when the unit is in standby mode. It switches
back to standby once it ejects the video cassette.
For main unit.
≥Press [<, EJECT] on the main unit.
For remote control.
≥Press [VHS] and then press and hold [∫, STOP] for about 3 or more seconds.
≥Break out the video cassette’s tab to prevent accidental erasure. Cover the hole with a double layer of
adhesive tape when you want to use the video cassette for recording again.
≥You can use video cassettes with the VHS and S-VHS marks, but this unit is unable to make full use of the
characteristics of S-VHS video cassettes.
≥Poor quality or damaged video cassettes can cause the heads to become dirty and malfunction. Store your video cassettes carefully and
discard them when they become dirty or damaged.
≥Never use video cassettes on which juice has been spilt or those that are extremely damaged since this will not only cause the heads to
become dirty, but will also make the unit malfunction.
Cleaning the video heads
Dirt on the video heads can cause poor recording and play.
If the picture does not improve, use an optional head-cleaning cassette (part number NV-TCL30PT). If the problem persists, seek advice from
a qualified service person.
Inserting video cassette
Video cassette information
∫ Video cassettes
∫ Video cassette care
∫ Maintenance
Tab
VHS
PP-Sample.book 48 ページ ２００４年３月８日 月曜日 午後６時３分