American Dynamics PMC-4U-CACI - Manual (Page 33)

Hardware and Software Design • Manufacturing Services
P a g e 33
Order Information
PMC-4U PMC Module with 4 UART channels and 2
synchronous/asynchronous serial channels
Programmable baud rates
differential and single ended data inputs and outputs
RS-188, 232, 422, 423, 485 standards supported
32 bit data interface
Eng Kit–PMC-4U HDEterm68 - 68 position screw terminal adapter
HDEcabl68 - 68 IO twisted pair cable
Technical Documentation,
1. PMC-4U Schematic
2. PMC-4U Reference test software
Data sheet reprints are available from the
manufacturer’s web site
reference software.
Note: The Engineering Kit is strongly recommended for first time PMC-4U buys.
Schematics
Schematics are provided as part of the engineering kit for customer
reference only. This information was current at the time the printed circuit
board was last revised. This revision letter is shown on the front of this
manual as “Corresponding Hardware Revision.” This information is not
necessarily current or complete manufacturing data, nor is it part of the
product specification.
All information provided is Copyright Dynamic Engineering