Panasonic DMC-GH3KBODY - Manual (Page 217)

217
Wi-Fi
Selecting the connection method
• You can select whether to connect via a wireless access point or connect directly.
Press 3/4 to select connection method, and then press [MENU/SET].
¢ WPS refers to a function that allows you to easily configure the settings related to the
connection and security of wireless LAN devices. To check if the wireless access point you
are using is compatible with WPS, refer to the manual of the wireless access point.
1 Press 3/4 to select the wireless access point you are connecting to, and press
[MENU/SET].
2
Enter the PIN code displayed on the camera screen into the wireless access
point.
3
Press [MENU/SET].
•
Refer to the wireless access point instruction manual for details.
Connecting via a wireless access point
Connection method Description of settings
[WPS (Push-Button)] ¢
Save push button type wireless access point that is
compatible with Wi-Fi Protected Setup
TM with a WPS mark.
P217
[WPS (PIN code)]
Save PIN code type wireless access point that is
compatible with Wi-Fi Protected Setup with a WPS mark.
P217
[Manual Connection]
Select this option when you are not sure about the
WPS compatibility, or when you want to search for and
connect to a wireless access point.
P218
When connecting with [WPS (Push-Button)]
Press the wireless access point WPS button until it
switches to WPS Mode.
•
Refer to the wireless access point instruction manual for details.
e.g.:
When connecting with [WPS (PIN code)]