Panasonic DMC-GH3KBODY - Manual (Page 287)

287
Others
• Picture might look whitish when lens or image sensor gets dirty with fingerprints or similar.
> If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft, dry
cloth.
> Refer to P302 when the image sensor gets dirty.
> Check that the exposure is correctly compensated. (P133)
• Is the AE Lock (P151) applied incorrectly?
> Cancel the settings of White Balance Bracket (P139) .
• Is the self-timer (P157) set to [ ]?
• The subject is beyond the focus range of the camera. (P69)
• There is camera shake (jitter) or the subject is moving slightly. (P117)
• Is [Focus/Release Priority] in the [Custom] menu set to [RELEASE]? (P55)
In this case, the picture may not be properly focused even if [AFS], [AFF] or [AFC] in Focus
Mode is set.
• Is [Shutter AF] in the [Custom] menu set to [OFF]? (P53)
• Is the AF Lock (P151) applied incorrectly?
• The shutter speed will become slower and the Optical Image Stabilizer function may not work
properly when taking pictures especially in dark places.
> We recommend holding the camera firmly with both hands when taking pictures. (P65)
> We recommend using a tripod and the self-timer (P157) when taking pictures with a slow
shutter speed.
• Are you using a lens which supports the Stabilizer function? (P19)
• Is there any memory remaining on the card?
The recorded picture is whitish.
The recorded picture is too bright or dark.
Multiple pictures are taken at one time.
The subject is not focused properly.
The recorded picture is blurred. The Optical Image Stabilizer is not effective.
Taking pictures using White Balance Bracket is not possible.