P267), P267 – Panasonic DMC-GH3KBODY User Manual

Page 267

Advertising
background image

267

Others

Using the stereo shotgun microphone (DMW-MS2:optional), you can switch between the
gun (ultra-directional) recording and the wide range stereo recording.

Preparations:

Close the built-in flash, and then turn this unit off.

Remove the hot shoe cover that is attached to the camera.

(P265)

1

Attach the dedicated stereo shotgun microphone to this unit, and then turn this
unit on.

2

Select [Special Mic.] on the [Motion Picture] menu.

(P37)

The menu items are displayed only when the stereo shotgun microphone is connected.

3

Press 3/4 to select the

Item

and then press [MENU/SET].

While the external microphone is connected, [

] is displayed on the screen.

When the external microphone is connected, [Mic Level Disp.]

(P190)

is automatically set to

[ON], and the mic level is displayed on the screen.

When attaching the stereo shotgun microphone, do not hold only the stereo shotgun
microphone because it may detach from the camera.

[Wind Cut] in the [Motion Picture] can reduce the wind noise effectively.

Do not open the built-in flash when the stereo shotgun microphone is attached.

If the noises are recorded when you use an AC adaptor (optional), use a battery.

Read the operating instructions of the stereo shotgun microphone for details.

External Microphone (optional)

[STEREO]:

Allows stereo recording of sound over a wide area.

[SHOTGUN]: Allows recording from one direction by shutting out background and

surrounding noise.

Advertising