Panasonic DMC-GH3KBODY User Manual
Page 288
288
Others
•
Is the ISO sensitivity high or the shutter speed slow?
([Sensitivity] is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)
> Decrease the ISO sensitivity.
> Increase the setting for [Noise Reduction] in [Photo Style] or lower the setting for each of
the items other than [Noise Reduction].
> Take pictures in bright places.
> Set the [Long Shtr NR] to [ON].
•
Is the [Picture Size]
or the [Quality]
set low?
•
Is the [Digital Zoom] set?
•
Stripes may appear in high ISO sensitivity or depending on the lens you use.
> Decrease the ISO sensitivity.
•
When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed
may introduce slight changes to brightness and color. These are a result of the characteristics
of the light source and do not indicate a malfunction.
•
When recording subjects in extremely bright locations or recording under fluorescent lighting,
LED lighting fixture, mercury lamp, sodium lighting, etc., the colors and screen brightness may
change or horizontal striping may appear on the screen.
The recorded picture looks rough.
Noise appears on the picture.
Striping or flicker may appear under lighting such as fluorescent lighting and
LED lighting fixture.
•
This is characteristic of MOS sensors which serve as the camera’s pickup
sensors.
This is not a malfunction.
•
When you see noticeable flicker or striping while recording a motion picture,
you can reduce the flicker or striping by setting up [Flkr Decrease]
and fixing the shutter speed. It is possible to select a shutter speed from
[1/50], [1/60], [1/100], or [1/120].
You can set the shutter speed manually in the Creative Video Mode.
Stripes appear in high ISO sensitivity.
[When the interchangeable lens (H-H020) is used]
The brightness or the hue of the recorded picture is different from the actual
scene.