Panasonic DMP-BDT330 - Manual (Page 25)

25
VQT4V26
P
la
yb
ack
You can use a smartphone or tablet as the Digital
Media Controller (DMC) to play back contents
from DLNA server on the Renderer (this unit).
Possible applications:
* DMC compatible software should be installed.
Preparation
Perform steps 1 to 3. (> 24)
4 Perform the “Remote Device Settings”.
( > 32)
≥ You can register up to 16 devices.
1
Press [HOME].
2
Select “Network”.
3
Select “Home Network”.
4
Select “Media Renderer”.
5
Select “Home Network” or “Wi-Fi Direct”
and press [OK], then follow the indications
on the screen.
6
Operate the DMC compatible devices.
To exit from Media Renderer screen
Press [HOME].
≥ Wi-Fi Direct connection while using Home Network feature
is only temporary, and the network connection method
returns to the original setting when exiting.
≥ Depending on the device or connection environment, the
data transfer rate may decrease.
≥ Depending on the contents and the connected equipment,
playback may not be possible.
≥ Items displayed in gray on the display cannot be played
back by this unit.
≥ This unit can be played back via connected equipment only
when controlled using DMC.
Using the Digital Media
Controller
*
*
*
+
Renderer
Server
Server
Renderer
Controller
Controller
About DLNA and Media renderer
For more details, refer to the following website
and the operating instructions for each of the
equipment.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
DMP-BDT330_230_VQT4V26_eng.book 25 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分