Messages, On the tv on the unit’s display – Panasonic DMP-BDT330 User Manual

Page 38

Advertising
background image

38

VQT4V26

Messages

Check the following when messages or service
numbers are displayed on the screen or unit’s
display.

Cannot play.
¾ You inserted an incompatible disc (Discs

recorded in PAL video, etc.).

Cannot display on this unit.
¾ You tried to play a non-compatible image.
¾ Confirm “SD” on the unit’s display is not

displayed and re-insert the card.

No disc inserted.
¾ The disc may be upside down.

$ This operation is not available.

¾ Some operations are unsupported by the unit.

(For example, reverse slow motion, etc.)

IP address is not set.
¾ The “IP Address” in “IP Address/DNS

Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Default
Gateway”. (Select the automatic address
acquisition if necessary.)

The current wireless network security setting
is weak. It is recommended to change to a
stronger security setting.
¾ Set a stronger network security level referring

to the wireless router operating instructions.

NET
¾ While connecting to a network.

No PLAY
¾ There is a viewing restriction on a BD-Video

or DVD-Video. (

> 33)

¾ The media is dirty or badly scratched. The

unit cannot play.

REMOVE
¾ The USB device is drawing too much power.

Remove the USB device.

SET

(“” stands for a number.)

¾ The remote control and this unit are using

different codes. Change the code on the
remote control.

Press and hold [OK] and the
indicated number button at
the same time for more than
5 seconds.

U59
¾ Temperature of this unit is hot and the unit

switches to standby for safety reasons.
Wait for about 30 minutes.
Select a position with good ventilation when
installing the unit.

H

 or F

(“

” stands for a number.)

¾ There is something unusual.
¾ Check the unit using the troubleshooting

guide. If the service number remains
displayed, do the following.

1 Disconnect the plug from the AC outlet, wait a

few seconds, then reconnect it.

2 Press [

Í/I] to turn the unit on.

If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.

On the TV

On the unit’s display

DMP-BDT330_230_VQT4V26_eng.book 38 ページ 2012年12月27日 木曜日 午前11時13分

Advertising