Audio playback network – Panasonic DMP-BDT330 User Manual

Page 37

Advertising
background image

37

VQT4V26

Referen

ce

Cannot switch audio.
¾ The audio cannot switch, if “Digital Audio

Output” is set to “Bitstream”. Set “Digital
Audio Output” to “PCM”. (

> 30)

Cannot hear the desired audio type.
¾ Check the connections and the “Digital Audio

Output” settings. (

> 11, 30)

¾ [BDT330] : When connecting this unit to a TV

via an HDMI AV OUT MAIN and to an
amplifier/receiver via an HDMI AV OUT SUB,
set “HDMI(SUB) Output Mode” to “V.OFF”.
(

> 11)

¾ To output audio from a device connected with

an HDMI cable, set “HDMI Audio Output” to
“On” in the Setup menu. (

> 30)

There is no sound coming out from the TV.
[BDT330]
¾ Audio may not output from the TV when the

amplifier/receiver is connected to the HDMI
AV OUT SUB, and “HDMI(SUB) Output
Mode” (

> 30) is set to “V.OFF”. In such a

case, output audio from the amplifier/receiver.
To output audio from the TV, set the
“HDMI(SUB) Output Mode” to “Normal”.

Disc cannot be played.
¾ The disc is dirty. (> 5)
¾ The disc is not finalized. (> 7)

Still pictures (JPEG) do not play back
normally.
¾ The images that were edited on the PC, such

as Progressive JPEG, etc., may not be played
back.

I can’t play back BD-Live.
¾ Confirm that this unit is connected to the

broadband Internet. (

> 13)

¾ Connect this unit to the network by a wired

connection.

¾ Confirm the “BD-Live Internet Access”

settings. (

> 33)

¾ Confirm a USB device is connected to the

USB port. (

> 17)

I can’t connect to the network.
¾ Confirm the network connection and settings.

(

> 13, 14, 32)

¾ There may be obstacles that prevent the unit

from detecting your home network. Bring the
unit and the wireless router closer to each
other. This unit may be able to detect your
network name (

> 16, “SSID”).

¾ Check the operating instructions for each

device and connect accordingly.

Cannot play current title.
¾ Confirm the network connection and settings.

(

> 13, 14, 32)

When using wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
¾ Higher transfer rate router such as 802.11n

(2.4 GHz or 5 GHz) wireless router may solve
the problem. If you use 802.11n (2.4 GHz or
5 GHz) wireless router, it is necessary to set
the encryption type to “AES”.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.

¾ On the “Wireless Settings” screen (> 32), the

continuous lighting of at least 4 “Reception”
indicators is the target for a stable connection.
If 3 or fewer indicators are lit or the
connection is being interrupted, change the
position or angle of your wireless router and
see if the connection state improves. If there
is no improvement, connect to a wired
network and perform the “Easy Network
Setting” (

> 14) again.

Audio

Playback

Network

DMP-BDT330_230_VQT4V26_eng.book 37 ページ 2012年12月27日 木曜日 午前11時13分

Advertising