Panasonic DMP-BDT330 - Manual (Page 28)

28
VQT4V26
∫ Secondary Video
∫ Top Menu
Display Top Menu.
∫ Pop-up Menu
Display Pop-up Menu.
∫ Menu
Display Menu.
∫ Picture Mode
Select the picture quality mode during play.
≥ If you select “User”, you can change settings in
“Picture Adjustment”.
∫ Picture Adjustment
Specific picture quality settings can be changed.
∫ Progressive
Select the method of conversion for progressive
output to suit the type of material being played.
≥ When the content is distorted, change the
settings from “Auto” to “Video”.
∫ 24p
Movies and other material recorded on
DVD-Video at 24p are output at 24p.
This works only in the following cases:
–
[BDT330] : “24p(4K)/24p Output” is set to
“24p(4K)” or “24p” (
> 29).
– [BDT230] : “24p Output” is set to “On” (> 30).
∫ Reset to Default Video Settings
Return video settings to the factory preset.
∫ Dialog Enhancer
The volume of the center channel is raised to
make dialog easier to hear.
≥ This function is effective for audio from the
HDMI terminal or the OPTICAL terminal only
when “Digital Audio Output” is set to “PCM”
(
> 30). (However, in this case, audio is output
as 2ch from the OPTICAL terminal.)
∫ Signal Format
∫ Distance
Set the amount of depth perception.
∫ Pop-Out Level
3D position for the Option menu or message
screen, etc. can be adjusted during 3D playback.
Video
Select on/off for images. The
recording method of original
video appears.
≥ During search/slow motion or
frame-by-frame, only the
primary video is displayed.
Soundtrack
Select on/off for audio and the
language.
Video Settings
Audio Settings
3D Settings
Original Keep original picture format.
Side by side
3D picture format comprising of
left and right screens.
2D to 3D
Converts 2D pictures to 3D
effect.
DMP-BDT330_230_VQT4V26_eng.book 28 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分