Attaching the speaker feet, Placement of speakers, Maintenance – Panasonic SC-MAX670 User Manual

Page 4: Preparing the remote control

Advertising
background image

VQ

T5

F

3

5

4

Attaching the speaker feet

For stability and to prevent damage to the floor, attach
the speaker feet to the bottom of the speakers.

Preparation
Put a protection layer below the speakers to prevent
scratches.

Placement of speakers

Put the speakers so that the tweeter is on the outside.

Use only the supplied speakers.
You can cause damage to the system and decrease the
sound quality if you use other speakers.

Note:
• More than one person is required to move, tilt or carry

the speaker.

• Keep your speakers at least 10 cm (4

z) away from the

main unit for proper ventilation.

• Put the speakers on a flat safe surface.
• These speakers do not have magnetic shielding. Do

not put them near TVs, PCs or other equipment easily
influenced by magnetism.

• When you play at high levels for a long period, it can

cause damage to the speakers and decrease the life of
the speakers.

• Decrease the volume in these conditions to prevent

damage:
- When the sound is distorted.
- When you adjust the sound quality.

Maintenance

To clean this system, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean

this system.

• Before using chemically treated cloth, read the

instructions that came with the cloth carefully.

Preparing the remote control

Use alkaline or manganese battery.

Install the battery so that the poles (+ and –) align with
those in the remote control.

CAUTION!
Keep the speaker feet out of reach of children to
prevent swallowing.

Speaker foot

Protection layer
(not supplied)

Tweeter

SC-MAX670P_eng.book 4 ページ 2014年2月26日 水曜日 午後5時49分

Advertising