Panasonic DMC-G6KK - Manual (Page 147)

147
Recording
¢1 Not available when [Wireless FP] is set to [ON].
¢2 When the flash (DMW-FL360L: optional) is attached, [External Flash] is displayed instead of
[Built-in Flash].
Item Description of settings
[Built-in
Flash]
¢1,2
[Firing Mode]
[TTL]:
The camera automatically sets the output of the built-in
flash.
[OFF]: The built-in flash fires only a signal-flash.
[Flash Adjust.]
The output of the built-in flash is set manually.
[External
Flash]
¢1,2
[Firing Mode]
[TTL]:
The camera automatically sets the output of the external
flash.
[AUTO]: Flash output is set by the external flash.
[MANUAL]: Set the luminosity ratio of the external flash manually.
[OFF]:
The external flash fires only a signal-flash.
[Flash Adjust.]
Set the output of the external flash manually when [Firing Mode] is set to
[TTL].
[Manual Flash Adjust.]
Set the luminosity ratio of the external flash when [Firing Mode] is set to
[MANUAL].
•
You can set from [1/1] (full brightness) to [1/128] in steps of [1/3].
[A Group]/
[B Group]/
[C Group]
[Firing Mode]
[TTL]:
The camera automatically sets the output of the external
flash.
[AUTO] ¢1 : Flash output is set by the external flash.
[MANUAL]: Set the luminosity ratio of the external flash manually.
[OFF]:
The external flashes in the specified group will not fire.
[Flash Adjust.]
Set the output of the external flash manually when [Firing Mode] is set to
[TTL].
[Manual Flash Adjust.]
Set the luminosity ratio of the external flash when [Firing Mode] is set to
[MANUAL].
•
You can set from [1/1] (full brightness) to [1/128] in steps of [1/3].
DMC-G6PDF-VQT4Z78_eng.book 147 ページ ２０１３年４月２５日 木曜日 午前１０時５分