Panasonic DMC-G6KK User Manual

Page 246

Advertising
background image

246

Wi-Fi/NFC

Describing method

When “select [Smartphone]”, etc. is described in a step,
perform any of the following operations.

The camera cannot be used to connect to a public wireless LAN connection.

Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless
access point.

We strongly recommend that you set an encryption to maintain information security.

It is recommended to use a fully charged battery when sending images.

When the battery indicator is flashing red, the connection with other equipment may not start or
the connection may be disrupted. (A message such as [Communication error] is displayed.)

When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.

Pictures may not be completely sent depending on radio wave conditions. If the connection is
terminated while sending pictures, pictures with missing sections may be sent.

Do not remove the memory card or battery or move to an area without any reception
while sending images.

The monitor display may become distorted for an instant while connected to the service,
however this will not affect the image being sent.

In this owner’s manual, steps for setting a menu item are described as follows.

[Wi-Fi]

> [New Connection]>[Remote Shooting & View]

Touch operation:

Touch [Smartphone].

Button operation:

Select [Smartphone] with the cursor
button, and then press [MENU/SET].

DMC-G6PDF-VQT4Z78_eng.book 246 ページ 2013年4月25日 木曜日 午前10時5分

Advertising