Panasonic DMC-G6KK User Manual
Page 334
334
Others
•
When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed
may introduce slight changes to brightness and color. These are a result of the characteristics
of the light source and do not indicate a malfunction.
•
When recording subjects in extremely bright locations or recording under fluorescent lighting,
LED lighting fixture, mercury lamp, sodium lighting, etc., the colors and screen brightness may
change or horizontal striping may appear on the screen.
•
There may be defective pixels in the image sensor. Perform [Pixel Refresh]
•
Are you in Exposure Compensation operation?
> Press the rear dial to switch to Exposure Compensation operation.
> Set the [Function Lever] to [AUTO].
•
If the subject contains sections that differ in color to the surroundings, touch those sections or
the main colors of the subject to set the AF frame
•
Is your finger covering up the speaker?
•
If the camera is moved too slowly, the camera has assumed that camera motion was stopped
and will end the still picture recording.
•
If there is a great deal of shaking towards the recording direction while moving the camera,
recording will end.
The brightness or the hue of the recorded picture is different from the actual
scene.
Bright spot not in subject is recorded.
You cannot compensate the exposure.
The function lever does not work.
Subject cannot be locked.
(AF tracking not possible)
Operation sound is small.
Recording by Panorama Shot Mode is ended before finishing.
DMC-G6PDF-VQT4Z78_eng.book 334 ページ ２０１３年４月２５日 木曜日 午前１０時５分