Avaya M7310 - Manual (Page 10)

M7310 Telephone User Guide Page 10
- Issue 02a (03 October 2011) IP Office
Administration Feature Codes
The following feature codes are used to edit phone settings. Some functions may request a security code after the feature
code is entered. When this occurs, enter your
login code and press #.
· Button Inspect: Feature *0
After selecting this function, pressing any programmable button will display the function currently assigned to
that button.
· Auto Dial Button : Feature *1
This feature allows you to store a number against a programmable button. After entering the code, press the
button to be programmed and then enter the number that the button should dial.
· Internal Autodial (User Button) : Feature *2
This feature allow you to create a user button that matches another user's extension number. The button can then
be used to call the other user. The button can also be used to see the current state of the other user. The button's
icon will flash when the other user has a call alerting them. When that is the case, pressing the button answers
their call. When the icon is steady the user is busy.
· Button Program : Feature *3
This feature allows programming of a range of features onto programmable buttons.
· Store a Personal Speed Dial : Feature *4
This feature code allows you to configure personal directory entries for use as speed dials. After selecting this
function, dial the two digit number between 00 to 99 for the personal directory entry to be programmed. Note that
no warning is given if the entry is already programmed. Enter the number and press Hold. Then enter a name to
associate with the number. The volume buttons are used to move the cursor. When complete, press Hold again.
· Ringer Sound : Feature *6
Adjust the ringer sound type. When selected, the number keys 1 to 4 are used to select the required ringer. The
volume can also be adjusted using the volume controls.
· Contrast : Feature *7
Adjust the display contrast. When selected, the number keys are used to select the required contrast.
· Ring Volume : Feature *80
This feature code causes the phone's ringer to sound for a short period during which its volume can be adjusted
using the phone's volume controls.
· Enbloc Pre-Dialing On/Off : Feature *82
This feature code allows you to switch enbloc dialing on or off. When on, you can compose a number to dial without
the digits being dialed until the number is complete.
48
68
66
66
64
19
62
62
62
18