Avaya M7310 - Manual (Page 67)

M7310 Telephone User Guide Page 67
- Issue 02a (03 October 2011) IP Office
Button Programming: Internal Auto Dial (User Button)
12.6 Function Button
This process allows you to assign a selected telephone system function to a programmable button. This is not the full
set of button functions available from the telephone system. The system administrator can assign other button functions
and will inform you what those functions are if they do that.
1. Press Feature *3.
· If a security code is requested, enter your phone login code and press #.
2. Press * (or More if displayed).
3. Enter the number for the feature required as listed below. Alternately use the and buttons to move
through the list of functions.
01. Speed dial
02. Ring Again
03. Conference
04. Call Forward All
05. Last Number Redial
06. Page Group
07. Voicemail
08. Automatic Intercom
09. Priority Call
10. Transfer
11. Call Park
12. Group Pickup
13. Direct Pickup
14. Timer
15. Do Not Disturb
16. Contrast
17. Group Listen
18. Time of Day
19. Call Log
20. Self-Administer
21. Account Code
22. Forward on Busy
23. Forward on No Answer
24. Pickup
25. Directory
26. Flash Hook
27. Internal Auto Answer
28. Hunt Group Night Service
29. Twinning
30. Ringer Off
4. Press Hold to select a currently displayed function (or press the Selct soft key).
5. If the button has an existing function it is displayed.
6. Press Hold to assign the function (or press the Repla soft key). Otherwise, press Feature to return to
function selection (or press the Back soft key).
7. Press Release to exit programming.
12.7 Feature Button
This process allows you to store some of the Feature codes that you can dial. You can then activate the feature using a
single button press.
·
!
Warning
This process will overwrite the existing function of a programmable button without any warning.
1. Press Feature *3.
· If a security code is requested, enter your phone login code and press #.
2. Press the button to program.
· You cannot override the programming of any button configured to a call appearance function by your system
administrator.
· On buttons that you can program, any existing function is overwritten without warning. If in doubt, use
Feature *0 to inspect the button first.
3. Enter the feature code of the function required.
· Speed Dial : 0
· Ring Again : 2
· Conference : 3
· Forward Unconditional On
: 4
· Last Number Redial : 5
· Page : 60
· Retrieve Messages : 65
· Dial Voice Call : 66
· Priority Call : 69
· Time of Day : 803
· Timer : 77
· Transfer : 70
· Call Park : 74
· Call Pickup Group : 75
· Directed Call Pickup : 76
· Do Not Disturb : 85
· Group Listen On : 802
· Call Log : 812
· Retrieve Messages : 981
· Contrast : *7
68
71
70
68
68
70
70
71
68
70
71
68
70
69
71
69
68
70
71
68
71
68
69
69
70
69
69
70
70
71
71
9
71
70
68
68
70
70
71
68
70
71
71
71
68
70
69
69
70
68
71
68