Button functions, 3 button functions, 2 viewing call details – Avaya M7310 User Manual

Page 8

Advertising

M7310 Telephone User Guide

Page 8

- Issue 02a (03 October 2011)

IP Office

1.3 Button Functions

In addition to the standard buttons 0 to 9, * and # buttons for dialing, the phone also has the following additional keys
listed below. Some buttons may use either icons or words depending on your locale and the particular model of the phone
that you have.

Hold

Put the current call on hold. The calls associated call appearance key flashes. Press that key to retrieve the call
from hold.

Feature

This key is used to access a range of special functions by pressing the key and then

dialing a feature code

Release

End (drop) the current call.

· Display Soft Keys

The three keys below the display are called soft keys. Their functions change while you use the phone. The current
function of each key is indicated by the text label in the display.

Volume Controls

Increase or decrease the volume during a call.

· Handsfree Speaker

The bottom right button is fixed as a handsfree speaker button. You can press this button to answer or make a call
in handsfree speakerphone mode. You can also press it to switch from the handset to the speaker during a call. The
button is lit when the phone is on the speaker.

· Shift

The triangular Shift button is used with the adjacent set of programmable buttons; those without icons. They
represent both buttons 10 to 21 and buttons 22 to 33. The first set are the ones used by default when you press
any of the buttons. When you want to access or use the second set, press the Shift button and then press the
button. If the phone is idle, it will display Shifted to indicate that you are using the second set of buttons. Note
that the phone will usually revert to the first set of buttons following any use of the buttons.

The button layout is indicated below. The double-digits are the button numbers for

programmable buttons

. The default

function for those buttons is indicated. The function for each programmable button can be set by you or by your system
administrator.

10/22

14/26

18/30

11/23

15/27

19/31

12/24

16/28