ARCHOS TV+ - Manual (Page 46)

MANUAL V1.0 TV+ MAIN SETTINGS > P. 46
7. Main seTTings
In the Home screen, select the “ Settings ” menu item and choose a setting.
USING THE bUTToNS
To open a settings screen, press the Menu button and use the navigation but-
tons to highlight the “ Settings ” menu item. Then, select the setting you want
to modify (“ Sound ”, “ TV Settings ”, “ Appearance ”, etc.) and press
OK
.
Once you are in a settings screen:
use the up/down navigation buttons to highlight a parameter.
use the left/right navigation buttons to select a different setting.
when you have finished adjusting your settings, press the Exit button to
save them and go back to the Home screen.
When it is possible, use the up/down navigation buttons to scroll the screen
up and down.
7.1 “sOund” seTTings
This screen allows you to adjust the
sound settings of your ARCHOS to
your personal taste.
“Audio Output”
defines whether the audio signal is sent out via the “ Analog Line-Out ”, “ HDMI ” or
“ SPDIF ” interface depending on how you have connected the ARCHOS to your TV.
“Bass Boost Level”
adjusts the bass boosting level.
“Preset”
allows you to quickly select a sound profile.
“Set Equalizer”
allows you to use a custom sound profile. Select this option to enter the equalizer
screen (see next section).
•
•
-
-
-
-
-
-
-
-