ARCHOS TV+ - Manual (Page 47)

MANUAL V1.0 TV+ MAIN SETTINGS > P. 47
“Balance” (not available in HDMI output mode)
allows you to balance the sound between the left and right stereo channels.
“Reset”
resets the sound parameters to the default values.
“EqUALIzER” SCREEN
Your ARCHOS features a 5-band
equalizer.
Select a band (Bass, Mid. bass, Mid.
range, Mid. treble or Treble), then
use the up/down arrows to change
the gain level for these frequency
ranges.
•
•
It is advised that you change these
settings while listening to music, in
order to be able to appreciate the
sound changes.
7.2 “TV seTTings”
These settings could potentially make your screen go blank. You will need to select the
“ Apply change ” button before anything happens. Read the on-screen messages VERY
CAREFULLY so that you do not get stuck with a blank screen.
“TV Connection”
select the type of video output (“ Composite ”, “ S-Video ”, “ Component ”, “ RGB ” or
“ HDMI ”), based on how you have connected the ARCHOS to your TV.
“Resolution” *
select the resolution that best adapts to your TV: “ VGA 4/3 (640x480 60Hz) ”,
“ 480p 16/9 (720x480 60Hz) ” or “ 576p 16/9 (720x576 50Hz) ”.
* This parameter only appears if you choose the “HDMI” TV connection mode.
-
-
-
-