ADIC 4000 - Manual (Page 47)

Drive Operating Conditions 5-7
Left Indicator Panel LED
Label Color State Operating Condition
2.6 Yellow ON
Blinking Tape is recorded in 2.6
format.
Tape is recorded in another
density. You selected this
density for a write from BOT.
6.0 Yellow ON
Blinking Tape is recorded in 6.0
format.
Tape is recorded in another
density. You selected this
density for a write from BOT.
10.0 Yellow ON (default)
Blinking Tape is recorded in 10.0
format.
Tape is recorded in another
density. You selected this
density for a write from BOT.
20.0 (4000/7000DLT) Yellow ON (default)
Blinking Tape is recorded in 20.0
format.
Tape is recorded in another
density. You selected this
density for a write from BOT.
Compress Yellow ON
OFF Compression mode enabled.
(Compression can be done
only in 10.0, 15.0, 20.0, and
70.0 density.)
Compression mode disabled.
Density Override Yellow ON
OFF (default)
Blinking You selected a density from
the front panel.
Density will be selected by
the host (automatic).
You are in density selection
mode.
All Right Indicator
Panel LEDs, or,
all Left Indicator
Panel LEDs - Blinking A POST error has occurred.
Table 5-3 Operating Condition Indications