ADIC 4000 - Manual (Page 83)

EN 55022 Compliance (Czech Republic Only) C-5
EN 55022 Compliance (Czech Republic
Only)
This device belongs to category B devices as described in EN
55022, unless it is specifically stated that it is a category A
device on the specification label. The following applies to
devices in category A of EN 55022 (radius of protection up to
30 meters). The user of the device is obliged to take all steps
necessary to remove sources of interference to telecom-
munication or other devices.
Pokud nenÌ na typovÈm ötitku poËÌtaËe uvedeno, ûe spad·
do t¯Ìdy A podle EN 55022, spad· automaticky do t¯Ìdy B
podle EN 55022. Pro za¯ÌzenÌ za¯azen· do t¯Ìdy A (ochrannÈ
p·smo 30m) podle EN 55022 platÌ n·sledujÌcÌ. Dojde-li k
ruöenÌ telekomunikaËnÌch nebo jinych za¯ÌzenÌ, je uûivatel
povinen provÈst takov· opat¯enÌ, aby ruöenÌ odstranil.
CE Notice
Marking by the symbol indicates compliance of this tape
library to the EMC (Electro-magnetic Compatibility) directive
of the European Community. Such marking is indicative that
this tape library meets or exceeds the following technical
standards:
EN 55022 "Limits and Methods of Measurement of
Radio Interference Characteristics of
Information Technology Equipment." This
system is an EN 55022 Class B device.
EN 50082-1:1997 "Electromagnetic compatibility-
Genericimmunity standard Part 1: Res-
idential, commercial, and light industry."
EN 61000-4-2 "Electromagnetic compatibility for
industrial-process measurement and
control equipment Part 2: Electrostatic
discharge requirements." - Severity level 3.
IEC 801-3 "Electromagnetic compatibility for
industrial-process measurement and
control equipment Part 3: Radiated
electromagnetic field requirements." -
Severity level 2.